Specification

• At a Glance

  Vandal resistant body, with a flush button;

  PoE (IEEE802.3af, Power-over-Ethernet);

  Two-way audio communication over IP networks with Echo Cancel feature;

  Complies with SIP standard for easy integration in every SIP capable PBXes;

• Physical & Power

  Front panel: Aluminum

  Button: 1 call button

  Wiegand port: Support

  RS485 port: Support

  RF card reader: 13.56MHz

  Relays out: 2

  Inputs: 3

  Microphone: -40dB

  Speaker: 8Ω / 2W

  Power out: 12V/400mA

  Ethernet port: RJ45, 10/100Mbps adaptive

  802.3af Power-over-Ethernet

  12V DC connector (if not using PoE)

  Water-proof & Dust-proof: IP65

  Installation: Flush-mounted or Wall-mounted

  Flush-mounted DIM: 213x124x68mm

  Wall-mounted DIM: 190x110x40mm

  Working Humidity: 10~90%

  Working Temperature: -20°C ~ +55°C

  Storage Temperature: -40°C ~ +70°C

• Audio

  SIP v1 (RFC2543), SIP v2 (RFC3261)

  Narrowband audio codec: G.711a, G.711μ, G.729

  Broadband audio codec: G.722

  DTMF: In-band, out-of-band DTMF (RFC2833),SIP Info

  Echo Cancellation

  Voice Activation Detection

  Comfort Noise Generator

• Door Entry Feature

  Relays controlled individually by DTMF tones

• Networking & Protocol

  Protocols support: IPv4, HTTP, HTTPS, FTP,SNMP, DNS, NTP, TCP, UDP, ICMP, DHCP, ARP

• Deployment

  Auto-Provisioning

  Web management portal

  Web-based packet dump

  Configuration backup / restore

  Entry log export

  Access table export / import

  Firmware upgrade

  System logs (include door access logs)

• Application Scenario

  Office door phone with on-site or hosted IP-PBX

  Remote site entry over Internet

  Apartment/flat intercom with door access control